KwTallyRunning watts, starting watts, and the number that actually sizes the unit.

How much does a 10 kW standby generator cost in Chicago, IL?

A 10 kW standby generator installed in Chicago, IL
$8,584
essential circuits — furnace, fridge, sump, some lights · typical range $6,295 – $11,445
Typical totalinstalled, 10 kw$8,584
Range you should see in bidsthree bids on the same scope normally land inside this$6,295 – $11,445
Labor portion45% of the job — this is the part that moves by city$3,863
Material portion55% — bought at national prices$4,721
Electricians pay near Chicagoabout $45/hr · Chicago-Naperville-Elgin, IL-IN metro$94,450/yr
U.S. mean for the same tradeSOC 47-2111$71,490/yr
Versus the national pricetrade pay here runs +32.1% against the U.S. mean+$1,084

Notes

  • Where the number comes from. The national price for a 10 kW standby generator installed is $7,500 installed — standby generator pricing published for 2026, unit plus installation. Labor is about 45% of that. Electricians near Chicago, IL average $94,450 a year against a U.S. mean of $71,490 — a factor of 1.321 — so the labor half is scaled by that and the material half is not. Source: BLS OEWS May 2025 for the Chicago-Naperville-Elgin, IL-IN metro area, SOC 47-2111.
  • Why the city matters, not just the state. Trade pay moves inside a state as much as it does between states. Crews do not commute across a state to bid a job, and materials ship at national prices either way — so a metro wage is the honest input here and a state average quietly rounds four different cities into one number.
  • What is in the price: the generator, a concrete or composite pad, the transfer switch, electrical connection, gas piping from an existing supply, permit and commissioning.
  • What is not: a propane tank and its burial, a gas meter upsize where the utility requires one, trenching over long distances, and the annual service contract. These are the lines that turn a $8,584 quote into a $10,730 invoice, so ask about each one before signing.
  • Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.

a 10 kW standby generator installed in Chicago, IL

$8,584 is the typical number, and three bids on the same scope normally land between $6,295 and $11,445.

That is $1,084 more than the same job priced at the national average.

Why the city changes the number

About 45% of this job is labor — $3,863 of the $8,584 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.

Electricians near Chicago average $94,450 a year, against a U.S. mean of $71,490. That is a factor of 1.321, so the labor half is scaled by it and the material half is not.

Source: BLS OEWS May 2025 for the Chicago-Naperville-Elgin, IL-IN metro area, SOC 47-2111.

What the quote should include

The lines that turn a quote into an invoice

Ask about each of them before you sign. On a job this size they are the difference between $8,584 and something a quarter higher.

Use it as a bid check, not a quote

This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.

If a bid lands outside $6,295 – $11,445, that is not automatically wrong — but it is the question worth asking out loud.

Nearby sizes

Read more