KwTallyRunning watts, starting watts, and the number that actually sizes the unit.

How much does a 10 kW standby generator cost in Dallas, TX?

A 10 kW standby generator installed in Dallas, TX
$6,956
essential circuits — furnace, fridge, sump, some lights · typical range $5,101 – $9,274
Typical totalinstalled, 10 kw$6,956
Range you should see in bidsthree bids on the same scope normally land inside this$5,101 – $9,274
Labor portion45% of the job — this is the part that moves by city$3,130
Material portion55% — bought at national prices$3,826
Electricians pay near Dallasabout $29/hr · Dallas-Fort Worth-Arlington, TX metro$59,960/yr
U.S. mean for the same tradeSOC 47-2111$71,490/yr
Versus the national pricetrade pay here runs −16.1% against the U.S. mean−$544

Notes

  • Where the number comes from. The national price for a 10 kW standby generator installed is $7,500 installed — standby generator pricing published for 2026, unit plus installation. Labor is about 45% of that. Electricians near Dallas, TX average $59,960 a year against a U.S. mean of $71,490 — a factor of 0.839 — so the labor half is scaled by that and the material half is not. Source: BLS OEWS May 2025 for the Dallas-Fort Worth-Arlington, TX metro area, SOC 47-2111.
  • Why the city matters, not just the state. Trade pay moves inside a state as much as it does between states. Crews do not commute across a state to bid a job, and materials ship at national prices either way — so a metro wage is the honest input here and a state average quietly rounds four different cities into one number.
  • What is in the price: the generator, a concrete or composite pad, the transfer switch, electrical connection, gas piping from an existing supply, permit and commissioning.
  • What is not: a propane tank and its burial, a gas meter upsize where the utility requires one, trenching over long distances, and the annual service contract. These are the lines that turn a $6,956 quote into a $8,695 invoice, so ask about each one before signing.
  • Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.

a 10 kW standby generator installed in Dallas, TX

$6,956 is the typical number, and three bids on the same scope normally land between $5,101 and $9,274.

That is $544 less than the same job priced at the national average.

Why the city changes the number

About 45% of this job is labor — $3,130 of the $6,956 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.

Electricians near Dallas average $59,960 a year, against a U.S. mean of $71,490. That is a factor of 0.839, so the labor half is scaled by it and the material half is not.

Source: BLS OEWS May 2025 for the Dallas-Fort Worth-Arlington, TX metro area, SOC 47-2111.

What the quote should include

The lines that turn a quote into an invoice

Ask about each of them before you sign. On a job this size they are the difference between $6,956 and something a quarter higher.

Use it as a bid check, not a quote

This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.

If a bid lands outside $5,101 – $9,274, that is not automatically wrong — but it is the question worth asking out loud.

Nearby sizes

Read more